The model is dived in two main parts, the car body with rear doorsteps, front pilot and truss rod support, and the frame with underbody parts like the compressor, tanks and the resistor bank.
2012/09/18
Cincinnati Wooden Combine, last virtual rendering
The model is dived in two main parts, the car body with rear doorsteps, front pilot and truss rod support, and the frame with underbody parts like the compressor, tanks and the resistor bank.
2012/09/03
2012/08/30
2012/08/29
When you do not know where you're going, get there, and as soon as possible
![]() |
| Traction Terminal Waiting Room, front view (click to enlarge) |
![]() |
| Traction Terminal Waiting Room, rear view with hollow structures |
In real life, things are not so easy: I unfolded my old 3D data files and stated that all the work must be done again a second time. Those 3D drawings are not "printable", because I ignored this technique and the requirements.
Some details must be simplified, as the minimum detail offset for 3D printers is 0.3mm, and minimum wall thickness is 1 mm. This is nearly invisible, but otherwise your 3D file is not usable. And more important : 3D printing remains expensive, and you pay the volume, not the details. This means that I had to throw away all the plain pillars and walls and replace them by sophisticated hollow structures, with as less wall thickness as possible.
As a test object, I redraw the Market Street Elevation of the Traction Terminal waiting room. This is only a small part of the entire structure, but it contains many elements that could be reused by "copy and past" for the Terminal Building. If this works, the dream of a self made "plastic kit" of the Traction Terminal could become reality. Obviously, 3D printing technique will be applicable only for building, not for the shed. The train shed could be produced with laser cut styrene parts, but this is another story...
Fortunately, when you do a work twice, the second time it is often quickly done. So now the Market Street Elevation is nearly "ready to print". I must just add doors and make some minor corrections. You may have noticed that the eagle is missing. Actually, I am not yet experienced enough to modelize the stone eagles in 3D. This will be a project for this winter.
2012/08/07
NWSL Stanton drive : corrected drawing
In the previous drawing, I made a small error : the 7 foot version of the NWSL Stanton drive is not symetrical, due to the modular construction of the truck for multiple wheelbases.
Download pdf diagram
The most important change in the diagram is that the real centerpin has moved 0.87 mm to the (front) A end of the bogie. I consider as A ends those where the wires came out and where the removable coupler support is mounted (who is not shown in my diagram)
So you must deal with a "real" and a "virtual" centerpin with this motor bogie. The Stanton drive with 6'6" wheelbase would be symetrical.
Download pdf diagram
The most important change in the diagram is that the real centerpin has moved 0.87 mm to the (front) A end of the bogie. I consider as A ends those where the wires came out and where the removable coupler support is mounted (who is not shown in my diagram)
So you must deal with a "real" and a "virtual" centerpin with this motor bogie. The Stanton drive with 6'6" wheelbase would be symetrical.
Subscribe to:
Posts (Atom)






