2012/08/03

Doors for the THI&E Wooden Combine

Front view of Interurban wooden combine
After a short summer break, it is time to resume work on the big 61 foot wooden combine. I gave him rear passenger folding doors and baggage sliding doors in the front. Buffers were added also.

To pain the modeler, the Cincinnati Car master mechanics has given the front and rear end a different curvature radius. So you need to model all panels and complex end roofs twice and you can not "copy and paste".

The ovale window in the passenger departement was also punched out of the side. And then I tested if this version would be "waterproof" for 3D resin printing  - and it is ! But it will be still a long way from the virtual 3D drawing to the real H0 model: the pilot, rear steps and underbody parts, all this is not yet made.

The first version I want to finish would be those from the Terre Haute Indianapolis & Eastern Traction. They had rear folding doors, but in this case I need to built new Baldwin truck frames. The Standard C80P frames matching for the Ohio Electric version, but then the rear door must be a swinging door at floor height.

Rear part of Interurban wooden combine
 
 





2012/07/26

Streetcars in Wrocław / Breslau (2)

The backbone of the streetcar system in Wroclaw are still the Konstal 105N cars. They can not hide their relationship with PCC cars. The Polish manufacturer Konstal copied many PCC features, even if he was not licensed as the CKD Tatra of Prague was.

In Wroclaw, they ride in two-car trains, with the second car mostly "downgraded" as a motor trailer without controls.

A number of the Konstal 105N were rebuilt and recieved new doors and new front and rear ends made of plastic with rectangular headlights.


2012/07/25

Streetcars in Wrocław / Breslau (1)

During a summer trip to Poland, I made a stop in Wrocław / Breslau. This town hosts an extensive standard gauge streetcar system.

The newest cars in Wrocław are Skoda 16T (uni-directional) or 19T (bi-directional).

They are far cousins of the Portland Inekons with five-carbody-sections and streamlined ends developped by the design center of the carbuilder Porsche.


2012/07/13

NWSL Stanton Drive for H0 Traction Models


Some month ago, I bought a pair of Tenshodo "SPUD" WB24.5 motor bogies and build a resin printed truck frame around. This trucks are fairly ok, but have some weak points as they are speedy, a little noisy and have fragile gears.

Corrected version of the drawing : The centerpin is not centered
NorthWest Shore Line (NWSL) has developped a similar drive called "Stanton". I purchased and examined a pair of them. On any point of view, they can be considered as a "better SPUD" : the use of more improved materials and some refinements on the construction make them a good running motor bogie.

Only one or two dark points remain: the current capture is sometimes "hesitating", at least on new unused models. I recommend always use of a pair with full current capture. The second dark point is the high price ... But some extravagant details like the motor fuse may prevent you to buy replacements :-)

The basic dimensions of the Stanton with 7' wheelbase and 36" wheels are nearly identical to the Tenshodo SPUD WB24.5 version. His low construction permits also a virtually unlimited rotation of the truck under the car.

NWSL offers the Stanton in many versions and even custom built. For the traction modeler, the type 1210 with a wheelbase of 6'6" or 7' and a wheel diameters of 33" and 36" covers nearly all of the existing bogie trucks of heavy and medium-weight Interurbans. With only small and probably invisble compromises, any truck with a prototypical wheelbase from 6'3" to 7' and wheel diameters from 32" to 37" could be built.

As NWSL don't deliver a blueprint with this truck, I draw it of my own and it is for download here as a pdf file. For the moment, only for version with 7' wheelbase and 36" wheels.

My existing resin print frame of a Standard C80P truck cannot be used without some sanding of the inside distance blocks. But I will modify this 3D model soon, so it could match with the Stanton drive. All my future developments of resin print bogie frames will be adapyted for the NWSL Stanton drives.

Download pdf diagram

2012/07/11

Truss Rods for the Ohio Electric Box Car


The four truss rods under this car cannot be printed with the resin shell or the resin printed underframe.

You can make them by bending small wire and glueing them into the prepared holes. The truss rod supports are printed solid with the frame.

Bending, fixing and glueing the wires is a little tricky.